[Elecraft] Navigator and K3

[Don Wilhelm]

Brian,

Are you using the K3 Line In and Line Out connectors?  If so, the 
Navigator must be configured for line level output.
You can check the audio input in TX Test mode - bring up the audio drive 
(and the Line In gain) enough to illuminate 4 bars on the ALC meter 
(that is NO ALC for the K3).  The 5th bar might flicker a bit and that 
indicated the proper level.

73,
Don W3FPR

On 6/1/2013 5:06 PM, Brian F. Wruble wrote:
> OK, I have my K3/P3 and Navigator correctly hooked up, I think.
>
> I am able to receive digital signals like PSK31, no problem.  I cannot seem
> to get any RF output using the Navigator to my P3.  I probably have some
> parameter set up wrong.   Any ideas?
>
> Tnx de Brian W3BW
>
>