[Elecraft] Dual Signal Image on NaP3 with KX3

[Tony Estep]

Yep, but if that didn't fix it right away it sounds like something else is
wrong; you don't have a stereo path for the I-Q, or something. Don't
know....

Tony KT0NY


On Fri, May 31, 2013 at 10:36 PM, Ariel Jacala <ny4g at hotmail.com> wrote:

> I tried the XG3 with the biggest signal on it and I still have the mirror
> image.  Do I tune right to the big signal and then move away?
>
> Ariel NY4G
>
> Sent from my iPad
>
> On May 31, 2013, at 11:11 PM, "Tony Estep" <esteptony at gmail.com> wrote:
>
> > On Fri, May 31, 2013 at 9:46 PM, Ariel Jacala <ny4g at hotmail.com> wrote:
> >
> >> I get a dual image on my NaP3 display....
> >
> > ==============
> > Ariel, sometimes NaP3's I-Q autobalancing gets discombobulated. It can be
> > cured very simply by putting in a very big carrier, S9+40 or so. I have
> my
> > XG-3 connected to the receive antenna input on the K3. When my NaP3 gets
> > out of sorts (not frequent, maybe once a month) I switch over to the RX
> > Ant, turn on the XG3 to the 0 dBm level, and tune the receiver to about
> 40
> > Khz away from the signal. This fixes the display immediately.
> >
> > This presumes that you do have the sound card and everything else set up
> > correctly. If you do, this simple trick will wake up NaP3's autobalance,
> > which will eliminate images from the display and make it perform
> perfectly.
> >
> > Tony KT0NY
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
>



-- 
http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352