[Elecraft] [K2] : Swapping frequencys between VFO's A and B

[Don Wilhelm]

Jean,

Yes, that is true, both VFOs must be in the same band.
The K2 cannot change bands by just moving the VFO from one band to 
another, you must use the BAND+/BAND- buttons.
If you do move the VFO from one band to another,  the displayed 
frequency will change, but the VFO will not follow very far outside the 
band that you moved away from.

73,
Don W3FPR

On 7/29/2013 8:20 AM, Behiels JeanPierre wrote:
> Hi K2 users;
>
> I do found next K2-software stage ?
> The K2 VFO memory does'nt take next two different VFO settings (example of two different band settings) VFO A = 20M and VFO B = 17M
> In this situation when we switch back to the other VFO,this switched VFO also take the VFO frequency from the VFO where you coming from in last button push ??
> You not can put in VFO A a 17M frequency,and in the other VFO B,by example a 20M frequency.
> They both always take the originaly frequency from one band where you coming from ??
> One of the "two different band"  frequencys will not stay  into the memory ?
> I presume this has a particular Elecraft reason hi ..
>
> Regards Jean ON4AEF.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>