[Elecraft] XG3

[Dick Dievendorff]

The XG3 Utility gets its port list from the operating system. If you look at
the Windows Device Manager, you should see the FTDI devices and their COM
port assignments.

Can the new KUSB communicate to the KX3?  Can the old KUSB communicate with
the XG3? 

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Mike Weir
Sent: Sunday, July 28, 2013 13:17 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] XG3

I am having a hard time getting the XG3 and my PC to communicate with each
other. 
Here is what I have....the XG3 and the KUSB cable.
I have hte FTDI software installed and it talks to my KX3 via a KUSB no
problem and has been doing this for close to a year. 
The XG3 (with a separate KUSB cable) was hooked up to my PC via a USB port.
A "new hardware" box came up and I followed the prompts. But the XG3 and my
pc are not talking. I f Us the KUSB cable from my KX3 and set it to that
port there is no problem and the XG3 can talk via the KX3 port. I want to do
the SSB Nul procedure and there fore I have to have both the KX3 and XG3 up
and running on my pc. In the XG3 software the com ports seem to be
limited...meaning for some reason they are not showing all  USB ports on my
PC?? I have tried to set up communication with all the ports that the XG3
software shows but  there is no communication at all. 
Mike
VE3WDM 
 		 	   		  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html