[Elecraft] Morse Code to send on PSK32.

[Ariel Jacala]

Several corrections

PSK31 can be sent without a computer as follows:

You can send without a computer using a paddle plugged in to the KX3 either through the input where the Elecraft paddle or aftermarket Palm Pico paddle can be bolted to the front near the speaker or where the other paddle input is on the side of the rig - but only in the PSK-D mode (not PSK-A).

Yes the input is CW through either paddle inputs.  The rig converts the morse keying to PSK internally within the rig and transmits PSK.  The internal keyer must be active in iambic mode.

Ariel NY4G 

Sent from my iPad

On Jul 25, 2013, at 11:46 AM, "Thomas Madden" <n9rsdtom at gmail.com> wrote:

> I read in the Description you can use digital modes with the KX3 without a computer. After more reading you can only use PSK 32 without a computer if you send in Morse code using the built in bug. Is that correct?
> Thank You
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html