[Elecraft] FW: KRC2 Configuration --- More

[Cady, Fred]

-----Original Message-----
From: Cady, Fred
Sent: Wednesday, July 24, 2013 9:50 PM
To: 'bwruble at gmail.com'
Subject: RE: [Elecraft] KRC2 Configuration --- More

Brian,
The issue is in the K3. You need to go into the K3 KRC2 menu and tap 1 to set BAND6=B6. It will then put out the 1010 6m code when on 6. Otherwise it puts out the 10 meter code. I got hung up on that too!
Cheers,
Fred KE7X

Fred Cady
fcady at ieee dot org

> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] On Behalf Of Brian F. Wruble
> Sent: Wednesday, July 24, 2013 10:03 AM
> To: Elecraft Reflector
> Subject: [Elecraft] KRC2 Configuration --- More
>
> OK, After many tries, I got the configuration almost right.  Since the
> KRC2
> has no 6 meter terminal, I have tried to assign 6 meters to any
> terminal I
> am not using.
>
> To be specific:
>
> I have a 160/80/30 dipole.  I assign 160, 80 and 30 to the KRC2 80M
> slot.
>
> I use my 40 meter beam for 40/17/12.  I assign 40/17/12 to the KRC2
> 40M
> slot.
>
> I have a tribander for 20/15/10.  I assign 20, 15 and 10 to the KRC2
> 20M
> slot.
>
> I have tried to assign 6M to 10M, 160M, 17M, 12M, XV1.  Every time, it
> winds up attached to the 20M slot.
>
> So, if I put the K3 band on 6M, the band decoder puts 12V on the 20M
> terminal --- not what I want.
>
> Yes, I have the switch in the "DL" position when i load, and in the
> "OP"
> position when I test.
>
>
> Tnx de Brian W3BW
>
>
>
>
>
> *Brian F. Wruble, C.F.A.
>
> *70 is the new 40.*
> *
> Mail: 1107 Key Plaza, PMB 447 Key West, FL 33040-4077
> Summers: P.O.Box 57, 7400 Augustine Herman Highway, Georgetown, MD
> 21930
> eFax  305.768.0278
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html