[Elecraft] Fw: HIgh swr on 6m

[WILLIS COOKE]

Stewart, do you have an amplifier attached?  I have found that having my Clipperton L in the circuit causes high SWR on 6 meters, but if I connect direct to the antenna switch the SWR on my SteppIR is low as it should be.  
 
Willis 'Cookie' Cooke 
K5EWJ & Trustee N5BPS, USS Cavalla, USS Stewart


________________________________
 From: Stewart Rolfe <gw0etf at btinternet.com>
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
Sent: Tuesday, July 23, 2013 10:09 AM
Subject: [Elecraft] Fw: HIgh swr on 6m
 

Posted this to support but no reply yet, maybe on a well earned summer break?! Anyone here help?

Thanks,
Stewart, GW0ETF


----- Forwarded Message -----
>From: Stewart Rolfe <gw0etf at btinternet.com>
>To: "k3support at elecraft.com" <k3support at elecraft.com> 
>Sent: Monday, 22 July 2013, 9:10
>Subject: HIgh swr on 6m
> 
>
>
>Hi,
>
>
>Just tried 6m for the first time on #145(!) and getting high swr into a well matched antenna as well as a dummy load plugged directly into either antenna socket; around 2.1/2.6:1 and high enough for tx calibration to fail.
>
>
>All other bands fine so wondering if I should check the low pass filter?
>
>
>73,
>Stewart Rolfe, GW0ETF
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html