[Elecraft] k3 7536

[Greg]

You can probably get by with a TX Delay setting of 10 without noticing
any issues but 20 is definitely what is causing your problem.

73
Greg
AB7R

On 7/23/13, Igor Sokolov <ua9cdc at gmail.com> wrote:
> Hank, this is known problem. Set TX dly to default and see the result.
>
> 73, Igor UA9CDC
> ----- Original Message -----
> From: "Pfizenmayer" <pfizenmayer at q.com>
> To: <elecraft at mailman.qth.net>
> Sent: Tuesday, July 23, 2013 1:39 PM
> Subject: [Elecraft] k3 7536
>
>
>> Called V73NS  tonite on 20 CW and he could not make out keying - said very
>>
>> choppy - the keying sounds fine in the headphones virtually no matter what
>>
>> I do. But on external rx it does in fact sound very choppy and sometimes
>> misses characters ,
>>
>> Using LOGIKIT CMOS4  external keyer - not the internal keyer.
>>
>> Using
>> VOX
>> QSK SEMI
>> TX dly 020 (tx delay is also affecting CW weight)
>> CW QRQ is OFF
>>
>> P3 is connected on the RS232 buss.
>>
>> I turned off  the logging computer - rebooted the K3 and still sounds
>> lousy
>>
>> If I use PTT with a foot pedal to PTT jack  CW gets even more choppy
>>
>> OK  , what have I got set wrong ????
>>
>> Hank K7HP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>