[Elecraft] [KX3} rig control with fldigi

[Nate Bargmann]

* On 2013 22 Jul 21:57 -0500, Mike WA8BXN wrote:
> I have found the solution to my problem. First, when the initialize button
> is pressed an error message appeared on the bottom of the main window, not
> on the configuration window that pops up. It took me a while to see that. I
> am using the hamlib option to control the KX3. It seems the com port number
> cannot be bigger than 9 for it to work. My Elecraft USB cable defaulted to a
> com port greater than 9, so it did not work. Going to device manager for
> that com port, one can change to com port number, in my case I changed it to
> com2 and it works fine now. 

Hi Mike, et. al.

The latest version of Fldigi that is in testing (I'm not exactly sure,
ask Dave, W1HKJ, for which version of Fldigi this change affects)
includes the latest version of Hamlib where the COM9+ limitation should
be removed.

If there are issues with the KX3 Hamlib support, please let me know.

73, de Nate >>

-- 

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us