[Elecraft] KX3 Receiver Problem

[Richard Neese]

I would open the unit and check that no boards/cables came lloose.

next I would plug a dummy load on and recalibrate it.

then I would also put a wire antenna on it and tune to 7.251 or 7.200 
and listen.

then report back what you swr meter says the s unit is at in receive 
mode if its higher then 4 or 5 you most likely have something in the new 
place generating noise. and there for its interfering with your receive 
signal.

but this is only 1 thought. there could be other reasons....