[Elecraft] XG3: unable to do Firware Upload

[Dick Dievendorff]

Sounds like a couple of problems, then.  

Glad you're going again!

If COM6 is a device that echoes whatever is sent to it, it looks a lot like
Elecraft devices when they're in their firmware boot loader.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KD7YZ Bob
Sent: Sunday, July 21, 2013 9:00 AM
Cc: 'K3 List'
Subject: Re: [Elecraft] XG3: unable to do Firware Upload

On 7/21/2013,   ()  sent :
> This sounds like a marginal USB to serial adapter power situation.
thanks info/help Dick. Quick Response!

Mainframe.
"seems" it was the 9v battery. I plugged into a 12v wall-charger, then got
the d/l to work.

however, I also had a confusing time with the pop-up which comes up and says
xg3 ready for firmware ... on COM6

but I have this on COM9 .. so even though I selected COM9, maybe because I
didn't close-port and go to COM9 .. rather than go straight to COM9 ...
dunno .. anyway, the Firmware uploaded.

thanks again

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html