[Elecraft] K3EXREF query
Michael Goins
wmgoins at gmail.com
Sun Jul 21 12:01:34 EDT 2013
I've used a little bit of coax seal too many times to count. Stick a bit in
the screwdriver tip and it will hold the screw very well.Used t recently
re-building a T-8 Tennadyne Log Periodic with lots of difficult to access
areas. Didn't drop a one (and they would have gone into the boom and been
totally inaccessible).
Mike, k5smg
Bella-Green Bed & Breakfast
www.bella-green.com
On Sun, Jul 21, 2013 at 10:52 AM, Geoffrey Mackenzie-Kennedy <lx2ao at pt.lu>wrote:
> The most useful tool, which I have found for this type of application, is
> the simple screw "Grabber". Not only can this tool be used to hold a screw
> and washer(s) while starting the thread, but also while removing a screw
> and washers. It can also be used to retrieve bits of wire, screws, washers
> and other small items which may have fallen into "difficult to reach"
> places.
>
> The tool requires only one hand to hold it during use, and is operated by
> the thumb of that hand. It is also very inexpensive, about $2, and is
> available from most of the major stockists.
>
> 73,
> Geoff
> LX2AO
>
>
>
> On July 20, 2013 at 6:39 PM, Ron D'Eau Claire wrote:
>
> You are right that one must be careful to not lose the split lock washer
>> between the KREF3 and the front panel, but testers didn't find the process
>> very difficult to do.
>>
>> What a couple of people who suffered hand tremors reported doing to avoid
>> that lock washer falling off was to put a small drop of petroleum jelly or
>> soft candle wax on the screw after placing the lock washer on it. That
>> kept
>> the washer from easily falling off while they repositioned the KREF3 board
>> and started the screw threads into the fitting on the front panel shield.
>>
>
> ______________________________**______________________________**__
> Elecraft mailing list
> Home: http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft at mailman.qth.**net <Elecraft at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list