[Elecraft] XG3: unable to do Firware Upload

[Dick Dievendorff]

This sounds like a marginal USB to serial adapter power situation.  Are you
using a laptop? Does it have AC power?  Are there other USB hubs available
on the computer?

73 de Dick, K6KR



-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of KD7YZ Bob
Sent: Sunday, July 21, 2013 8:30 AM
To: 'K3 List'
Subject: [Elecraft] XG3: unable to do Firware Upload

Howdy K3' people:

It seems I am connected to the XG3. I can't remember in the past doing a
Firmware Upload though  ... I tried this twice

-----------error------------
Elecraft XG3 Utility Version 1.4.3.22
OS Version 6.1 Build 7601 Windows 7/Windows Server 2008 R2
XG3 firmware file xg3_114.hex verified
Sending firmware file xg3_114.hex to XG3
XG3 firmware file checksum reconciliation word is x0000 Retry 1 successful
at address x001CC0 Retry 1 successful at address x002B40 Retry 1 successful
at address x002FC0 Retry 1 successful at address x005D80 Retry 1 successful
at address x006C00
XG3 checksum reconciliation word was replaced with computed value x7FE5
Waiting for reset to complete Total number of retries was 5 Highest number
of retries for any block was 1 Error code xE2000020, No response to MCU
version query
XG3 firmware load failed
Click "Close" to close this window
----------------------



--
73
KD7YZ Bob

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html