[Elecraft] K2 #7446 is alive and made my first QSO

[Don Wilhelm]

Stan,

If you have not already, check out the K2 Dial Calibration article on my 
website.  Part 3 covers the filters.
If you need a copy of Spectrogram, look for a link near the bottom of my 
home page.

73,
Don W3FPR

On 7/21/2013 3:22 AM, Stan AE7UT wrote:
> Don thanks so much for your quick reply and help.
> I went through all your suggestions and all looked great.
> I then looked in Appendix E as you suggested and went through those steps.
>
> Under problem #100 it says to check for missing audio filter options or the
> bypass jumpers.
> I re-soldered the jumpers and all is well.  Very loud audio now even seems
> better than my other K2.
>
> Now on to the filter alignment.  I build an Elecraft wide band noise
> generator last night and I'm looking forward to learning how to get those
> filters set up.
>
> Thanks so much.
>
> 73
> Stan AE7UT
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K2-7446-is-alive-and-made-my-first-QSO-tp7576940p7576953.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>