[Elecraft] PR6-10

[Mike Reublin]

My PR6-10 came in today, and in my excitement, I forgot to remove jumper P2 when I replaced the PR6. The preamp seems to work gangbusters with it in.

I have the CTRL wire going to pin 1 of the DE 15 connector and of course CONFIG:DIGI set for 6, 10, and 12M.

The instructions say that with that configuration, the jumper should be removed. Or have I misread?

Whoever put the case screws in must have used an impact driver. Those babies were TIGHT!

73, Mike NF4L