[Elecraft] PSK31 KX3 Elmer needed!

[Bill Frantz]

I find when using a SignaLink with both my K3 (using line in/out 
on the K3) and the Small Wonder Labs PSK-20 I have to raise the 
gain on the computer sound to radio link to maximum gain on both 
the signaLink and the computer sound adjustments. I get 
reasonable settings for the gain control on the K3 and a clean 
signal from the PSK-20. I've been operating this way for a 
couple of years with no complaints about spattering all over the 
bands. It is nice because I can restore the settings easily when 
they get changed.

Cheers - Bill, AE6JV/OK

On 7/18/13 at 10:35 AM, ny4g at hotmail.com (Ariel Jacala) wrote:

>You may have to adjust the sound card’s Line Out or 
>Headphones Out to achieve the peak ALC reading of about 4 bars. 
>Avoid going higher than about 50% so that Line Out or 
>Headphones Out do not clip.
-------------------------------------------------------------------------
Bill Frantz        | The first thing you need when  | Periwinkle
(408)356-8506      | using a perimeter defense is a | 16345 
Englewood Ave
www.pwpconsult.com | perimeter.                     | Los Gatos, 
CA 95032