[Elecraft] PSK31 KX3 Elmer needed!

[Barry LaZar]

Don,
     I've  lucky so long that I've totally forgotten that point. It's 
really bad when you get old. :-)

73,
Barry
K3NDM

On 7/18/2013 11:31 AM, Don Wilhelm wrote:
> Ariel,
>
> Nothing wrong with that plan at all.  Bond the computer and the KX3 
> together and power everything from the same AC outlet to minimize 
> common mode noise problems.  If that is not possible, you may have to 
> add isolation transformers in the audio lines.
> See the information provided by Jim Brown K9YC on the bonding 
> solution.  He has posted it many times here on the Elecraft reflector.
>
> 73,
> Don W3FPR
>
> On 7/18/2013 11:10 AM, Ariel Jacala wrote:
>> Barry and Don
>> I have the Signalink USB.  However I have it dedicated to the K2.  
>> For the KX3, I was thinking of creating a dongle with the attenuation 
>> resistors Don suggested instead of buying another Signalink.  I 
>> realize that I will still have to adjust the soundcard levels to make 
>> the TX just tickle the ALC.  Is there a flaw in this plan?
>> Ariel
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>