[Elecraft] K1 problem solved

[David L DuPuy]

Don,  My K1 is working perfectly now.  I discovered that by tightening down
the front panel screw (under the tuning knob) I had pulled the FP printed
circuit board away from the panel, and that meant the P1 and J1 connectors
weren't parallel.  After reinstalling the screw loosely, then pushing the
front panel onto the RF board, and then carefully tightening that screw, I
got good contact on all pins.  It seems really strange to me that pin 5 was
the only one having problems.  Many thanks for your help...  I learned a
lot!   David