[Elecraft] Trade off PR6 vs PR6-10 pre-amp

[W0FK]

John, did anyone reply to your questions? Have you made a decision? I am also
wondering if making making the switch will compromise 6M performance.

73,

Lou, W0FK


KH7T wrote
> I have the PR6 mounted on the K3.  Did successful JT65 6M moon bounce 
> with 11 element antenna,1000 watts, 110 foot BuryFlex coax, and 
> appropriate switching.  So this setup worked.
> 
> I note that the specification for the PR6-10 has about 2dB more gain 
> than the PR6.  The MDS and dynamic range specs are the same.
> 
> Would the 6 meter performance with the K3 using the PR6-10 be better or 
> worse than the PR6 because of:
> 
> 1. Wider pass band?  More opportunity for out of band noise?
> 
> 2. More gain?  Impact on overall dynamic range and noise figure?
> 
> My real question is should I sell my PR6 and get a PR6-10?  I do not 
> want to lose anything on 6 meters but perhaps could stand some 
> improvement on 10.
> 
> Aloha,
> John KH7T, Unrepentant Engineer
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html





-----
St. Louis, MO
K3 #'s 7463 and 2513, P3 #620, KX1 #1517, KX3 #0036

--
View this message in context: http://elecraft.365791.n2.nabble.com/Trade-off-PR6-vs-PR6-10-pre-amp-tp7576423p7576650.html
Sent from the Elecraft mailing list archive at Nabble.com.