[Elecraft] K3 RTTY

[Mike K2MK]

Hi Mike,

If you hear the tones in the K3 speaker then I assume you mean that you are
hearing them through the monitor. This tells me that the tones are getting
through to the K3 and that you are in transmit (red light). If you are in
DATA Mode AFSK A you should be able to adjust the MIC knob on the front of
the K3 for proper ALC indication. You should then be able to crank up RF
output with the PWR knob (unless you are in TEST mode).

73,
Mike K2MK


Mike Reublin wrote
> Thanks to some excellent suggestions, I was able to get receive working,
> but transmit is still a no-go.
> 
> I cannot get an ALC indication. I've run the sound card volume up and down
> it's range. I can hear the tones thru the K3 speaker, so they're getting
> in.
> 
> It's got to be something so simple I'll feel compelled to double dope-slap
> myself.
> 
> Mike NF4L





--
View this message in context: http://elecraft.365791.n2.nabble.com/Re-K3-RTTY-tp7576460p7576463.html
Sent from the Elecraft mailing list archive at Nabble.com.