[Elecraft] Need Help w/KAT1

[Don Wilhelm]

Lou,

What happens when you put a dummy load on it and attempt to do a TUNE - 
what SWR does it report?
If it is still 9.9 or something else above 1.5, then you have a problem 
with the K1 tuner - any chance you wound T1 in the direction opposite to 
that shown in the manual?

If the dummy load tunes OK, look for an open or a short in your antenna 
system.

73,
Don W3FPR

On 7/7/2013 1:22 PM, Lou Roux wrote:
> Hi all,
>
> I just completed a KAT1 for an older K1. The tuner passes all tests 
> but won't tune an antenna or a dummy load. When tuning all the relays 
> activate but at the end I get the message r 9.9. The MCU is v1.09e. 
> I've very carefully gone over all solder connections looking for 
> bridges etc. and component placement, everything is in order.
>
> I'm totally frustrated and in need of help! Please contact me offline 
> at   w6ur at arrl dot net.
>
> Thanks for reading,
>
> Lou - W6UR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>