[Elecraft] K2 S-meter calibration (CW-CWRV-USB-LSB) ?

[Don Wilhelm]

Jean,

You can adjust the CAL S HI menu in CW reverse or LSB or USB to 
compensate for that discrepancy.
If you have a signal generator that produces a 50 microvolt (-73 dBm) 
signal, use that to adjust the CAL S-HI menu parameter.

73,
Don W3FPR

On 7/5/2013 4:30 AM, Behiels JeanPierre wrote:
> Hi K2 builders;
>
> I do have calibrate my S-meter following exactly what is tell in the building manual.
> I do have done this allignement "CW normal mode".
> What I see while switching between CW reverse and USB and LSB mode is that the right led indication does not indicate most right on other modes ???
> I see a little difference in S-meter indicaton bewteen CW normal and the 3 other modes ??
> The S-meter indicaton is dropping one led from right.
> The most right led indication is done with RF control fully counter clockwise of course.
> Is this normal,I do have allign my filters and BFO settings all correctly.
> Yes I now,I am talking about details now,and what I see while playing with my new toy hi.
> Next days I start to build my KPA100 unit.
> Great building kit for sure...
>