[Elecraft] Noisy RX redux
Don Wilhelm
w3fpr at embarqmail.com
Thu Jul 4 20:06:03 EDT 2013
Mike,
The most important part of determining which AGC settings will work for
you is in the statement that you should not be listening for the noise
neither with a signal active, nor with no signal - you want to listen
for the K3 audio response between breaks in the received signal.
To a certain extent, the AGC settings that you would prefer depend on
your operating preferences. A CW operator who is doing contesting or
DXing would like to have a difference between strong signals and weak
ones, while a ragchewer would probably prefer to have most of the
signals at the same audio level.
73,
Don W3FPR
On 7/4/2013 6:38 PM, Mike Reublin wrote:
> Thanks, Don.
>
> I played around with the AGC settings as you describe, and I can't say I found settings that made a difference. But I do have a tin ear.
>
> You don't happen to remember where the DSP board mod is on the website, do you?
>
> Mike
>
> On Jul 4, 2013, at 5:47 PM, Mike Reublin <nf4l at nf4l.com> wrote:
>
>> Shortly after I got K3 3935 in Sept. of '09, the furor over noisy RX kinda peaked, and the result was a board swap.
>>
>> A friend just bought a used K3 with a slightly earlier SN, and the RX background is very harsh and sharp sounding. We both came to Elecraft from a PRO II/III where the background in an A/B comparison is a soft swhoooooooooooosh.
>>
>> I'd like to check and see if it has the same mod, but I've slept since then and cannot remember what the mod was called, or how to check for it. A tour of the mods page didn't kick my recaller into gear.
>>
>> A related wish: List the serial number when a mod goes into production.
>>
>> n unrelated wish: HAPPY 4th!
>>
>> 73, Mike NF4L
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list