[Elecraft] K3+P3+CAT rs232

[Jack Brindle]

The K3 and P3 work quite well with Rumlog. Connect things normally:
K3 <--> P3, P3 <—> USB Interface, USB Interface <—> Macintosh.
Then look at how the serial interface is configured for Rumlog. It most likely needs to be set to 38400bps to properly communicate with the P3/K3.

Most likely the problem is in the Rumlog configuration.

73 & HNY
Jack B, W6FB



On Dec 31, 2013, at 12:25 PM, Ricardo PY2PT <py2pt.brazil at gmail.com> wrote:

> Dear friends,
> 
> First of all, happy new year for everybody!
> So, after some years i decided to give Up from all interfaces!!
> Now, I'm using The k3 with P3 And connected the usb cable on computer And on The back of P3.
> Everything is ok with P3 but i cant use The cat with my log program -Rumlog.
> Só, i need to buy a rs232 Splitter do do it?
> 
> Best regards
> 
> Ricardo Rodrigues
> PY2PT / PX2F / 3D2PT / T30PT / T33PT
> py2pt.brazil at gmail.com
> http://www.py2pt.com
> @ricrodrigues
> T33A team member (2013)
> 8R1PY team member (2012)
> T30PY/T30SIX team member (2012)
> TO2FH (Mayotte Island - 2011) team member
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html