[Elecraft] K3/KPA500/KAT500 SWR problem

[Walter Underwood]

UHF connectors are rated for 500V. Maybe you need N connectors, which can handle 1500V.

wunder
K6WRU

On Dec 30, 2013, at 11:13 AM, Ray Coles <raycoles96 at gmail.com> wrote:

> Forgot to mention that I hauled my MFJ wattmeter/dummy load out to the bush and pushed up 100 watts into it down the feeder with 1:1 SWR, which convinced me that at least my UR8 feeder is OK. Also didn't mention I hooked up my FG01 antenna analyser up at the shack and all seemed normal, but of course the problem only comes over 40 watts (which equates to a pre balun 500V). THE PROBLEM REMAINS and I am still mystified!
> 73
> 
> Sent from my iPhone
> Ray Coles CEng M0XDL
> 10 Littlemoor Road,
> Weymouth DT3 6AA
> United Kingdom
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

--
Walter Underwood
wunder at wunderwood.org