[Elecraft] How does fskd work on the k3?

[Tom]

Hi
Thanks just found that.! 
Thanks to all for the hints. 
Tom va2fsa




-------- Original message --------
From: Richard Ferch <ve3iay at storm.ca> 
Date: 29/12/2013  20:50  (GMT-05:00) 
To: elecraft at mailman.qth.net 
Subject: Re: [Elecraft] How does fskd work on the k3? 
 
Tom,

If you are using MMTTY for FSK with a USB-based device, then in the 
MMTTY setup under the Misc tab where you select COM-TxD(FSK) for FSK 
keying, you must also click on the "USB Port" button and select option 
C. Limiting Speed. If you don't do this, MMTTY will release PTT as soon 
as the computer has finished sending the data to the device at USB 
speeds, which happens long before the radio has finished sending the 
data at RTTY speed.

73,
Rich VE3KI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html