[Elecraft] K3 and Micrometer II help

[Joe Subich, W4TV]

> Pi am using a Heil preset as received from Elecraft. I have the k3
> front mic cable. I have the wire marked line in on the cable to the
> line in on the radio. Same for line out. I have set jumpers to non
> electret. Can someone tell me what I am doing wrong.?

Elecraft ProSet has an ELECTRET mic you need to set the jumpers in
MKII for electret in order to supply the necessary power to the mic
element and then perform the audio level set-up as documented in the
MKII Users Manual.


73,

    ... Joe, W4TV


On 12/26/2013 12:37 PM, Tom wrote:
> Hi, I just hooked up my Microkeyer 2 installed all software and the
> software is communicating with the radio.  However if I talk into my
> Mike there is no transmit occurring via Vox or PTT on the radio. Pi
> am using a Heil preset as received from Elecraft. I have the k3 front
> mic cable. I have the wire marked line in on the cable to the line in
> on the radio. Same for line out. I have set jumpers to non electret.
> Can someone tell me what I am doing wrong.? Thanks
>
>
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html
>