[Elecraft] Weird K2 behavior

[Don Wilhelm]

Tom,

Isolate the problem.
What does the K2 display indicate?  If that is correct and you can tune 
the K2 with the VFO knob, then you have a problem with the N3FJP program 
and should ask or support for that program.

OTOH, if you cannot tune with the K2, open it up and do the VFO Range 
Tests for all band edges and we can likely help.  As one wild guess - do 
you have the secondary menu parameter for D19 set properly?  It should 
be "y" if the K60XV is installed, but must be "n" without the K60XV.  If 
you have installed the rework eliminators, you need to set it as though 
the K60XV were installed.

73,
Don W3FPR

On 12/26/2013 12:05 AM, Tom Field wrote:
> I have a K2 7432 with the K100, KSB, KAF2 options, and have been using the
> serial port through a Keyspan adaptor with N3fjp logging software. It
> correctly reads the radio frequency on all bands except 40 meters where
> regardless of the radio frequency it only reads 7198 This is new behavior
> as well.
> Below is the data from the program: Any one have any other Ideas?
>
> Tom F.
> KI6NRD
>
>
> Rig Name = Elecraft
> Read Frequency Command = FA;
> Read Mode Command = MD;
> Convert To Hex = False
> Com Port Name = COM4
> Baud Rate = 4800
> Parity = None
> Stop Bits = 2
> Data Bits = 8
> Power Option = None
> Numeric Frequency = 7.198
> String Frequency = 7.19800
> Mode = SSB
> Polling Rig = True
> Polling Rate = 2000
> Return Mode = True
> Return Frequency = False
> Mode From Frequency = False
> Version = Rig Interface Setup 1.2    (Ctrl R)
> Buffer = MD1;
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>