[Elecraft] [KX3] SWR/RF Display Switching to CMP/ALC

[Gary Hawkins]

Hi Dave,

Thanks for your response and, yes, this information is on page 15 of the 
C2 manual as well.  However, this tells you how the CMP/ALC display mode 
gets activated.  The problem I'm having is switching it back to SWR/RF.

You should be able to do this by tapping the Keyer/Mic knob and this is 
working here on the bench this morning, however, in the field sometimes 
this does not seem to work and I end-up stuck in CMP/ALC mode.  It might 
be finger trouble on my end but this has happened several times.

Can you confirm tapping the Keyer/Mic knob is the only way to switch 
between these two display modes?

Many thanks,

Gary
K6YOA

On 12/22/2013 8:24 AM, dave wrote:
> In manual Rev B4, page 15. Top right.
>
> 73 de dave
> ab9ca
>
>
>
> On 12/22/13 10:05 AM, Gary Hawkins wrote:
>> I use my KX3 almost exclusively for SOTA. I keep inadvertently
>> managing to get the display to switch from SWR/RF to CMP/ALC and can't
>> find a quick way to switch it back.  This occurs not just when
>> adjusting Mic gain or CMP, although I do switch power levels
>> sometimes.  Initially I thought this problem was associated with Hi
>> Curr (thanks for all the help on this issue) but it is not.  Can
>> someone help please?
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>