[Elecraft] Speakers audio is gone

[Dave Hachadorian]

Marcel,

You have probably blown the speaker amplifier chip, U1 on the DSP
Board.  Many of us have had the same problem.  Elecraft has not
been able to determine the cause of the failures, so they have
not provided a solution.

The part is inexpensive, but is very difficult to replace because
the pins are very close together.  If you know an excellent
soldering technician, maybe they could do it for you.  Otherwise,
you have to send the radio, or just the DSP Board, for repair.

Dave Hachadorian, K6LL
Yuma, AZ



-----Original Message----- 
From: Marcel Jorba
Sent: Saturday, December 21, 2013 10:36 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Speakers audio is gone

Hello

Since today, my K3 is not producing audio on the internal speaker
or via an external speaker connected to the rear speaker socket
Audio is fine in my headest via the front or the rear connector

Time to time I can see HI CURR on the display. I must power off
and on the eliminate it

Any idea?

Thanks

Marcel - EA3IN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html