[Elecraft] Configuration instructions

[Ian Kahn - Ham]

Bill,

I do, in fact, have a copy of the first edition of Fred's book.  I forgot it
was on the shelf.  At your suggestion I'm going back through it to get some
ideas and already like what I've read.

Thanks, 73, Happy Holidays, and all that jazz!

-- Ian
Ian Kahn, KM4IK
Roswell, GA  EM74ua
km4ik.ian at gmail.com
K3 #281, P3 #688, KPA500 #1468
HRD v5.x/6.0 Test Team

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill W2BLC
Sent: Thursday, December 19, 2013 3:22 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Configuration instructions

You should have a copy of of Fred Cady's book at hand. Everything about the
K3 is fully explained in same. Well worth buying. The Elecraft operator
manual leaves a lot unexplained well enough to understand for mere mortals.

Have fun - you will probably tinker for far more than a couple of hours. 
It is nearly endless what you can do with the settings of a K3 - making it a
personalized rig fully designed for your personal needs and uses.

Don't be afraid of making all your changes right from the panel. You do NOT
need special software - however, you can use K3_EZ. I have done it both
ways.

For a good explanation of settings for the K3 receiver, take a look at 
http://www.w3fpr.com/K3_AGC.htm    or, you can copy my settings at 
http://www.w2blc.net/K3.htm

Bill W2BLC K-Line
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com