[Elecraft] K-1 power out vs current draw.

["Hjalmar Duklæt"]

According to the manual the K1 will deliver around 5W at 14V (varies between bands), and the current draw is around 55mW (without display backlight). It can be operated on a voltage between 8.5 - 15V.

Hal/la4xx

On 13-12-19, "k3hx at juno.com"  <k3hx at juno.com> wrote:
> 
> Good folk,
> 
> In the planning stages for this year's field day which I plan to run QRP
> from a battery.
> 
> At 12 vdc, how much power will the K-1 deliver?
> What is the current draw at 12 vdc.
> 
> 
> At 13.8 vdc, how much current does the K-1 draw to deliver 5 watts out?
> 
> How low can the voltage be and still have the unit produce a stable output?
> 
> If there is a chart which shows this kind of voltage vs power out data, I'd
> be grateful for the link.
> 
> 72,
> 
> Tim
> 
> 
> ____________________________________________________________
> Do THIS before eating carbs (every time)
> 1 EASY tip to increase fat-burning, lower blood sugar & decrease fat storage
> http://thirdpartyoffers.juno.com/TGL3131/52b3454ae5d045492d71st02duc
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <Elecraft at mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>