[Elecraft] K-3 rig interface for N3FJP

[Michael Eberle]

Maybe I don't understand your problem, but I don't know why you need the 
K3 command strings.  You should be able to click on the 'Settings' menu, 
then click on 'Rig Interface.'  On this screen select Elecraft for the 
radio type, select the serial port, baud rate, etc...  Then when you 
click the 'Test' button it will start polling the radio.  If everything 
is working correctly, the frequency and mode will come up in the black 
boxes.

Mike
KI0HA


On 12/19/2013 11:53, GMuller885 at aol.com wrote:
> Good Afternoon:
>      I am a fairly new ham and new K3 owner. I have decided  to try using
> the N3FJP logging SW. YES I know there are others out there but  this is where
> I would like to start. Does any one know the K3 string to read  frequency
> and mode that goes in the N3FJP rig interface as shown on pg 46  of the N3FJP
> manual. I cannot find it in the K3 manual or do not to know what to  look
> under. Any and all help would be greatly appreciated.
>   
> Gerald Muller KF5EYC
> GMuller885 at aol.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>