[Elecraft] K-3 rig interface for N3FJP

[Dick Dievendorff]

Commands are described in the K3 and KX3 Programmer's Reference, available
from our manual page http://www.elecraft.com/K2_Manual_Download_Page.htm#K3

Look for the description of the FA and MD commands.  FA; reads the frequency
of VFO A.  MD; reads the K3's mode.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of GMuller885 at aol.com
Sent: Thursday, December 19, 2013 9:54 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K-3 rig interface for N3FJP

Good Afternoon:
    I am a fairly new ham and new K3 owner. I have decided  to try using the
N3FJP logging SW. YES I know there are others out there but  this is where I
would like to start. Does any one know the K3 string to read  frequency and
mode that goes in the N3FJP rig interface as shown on pg 46  of the N3FJP
manual. I cannot find it in the K3 manual or do not to know what to  look
under. Any and all help would be greatly appreciated. 
 
Gerald Muller KF5EYC
GMuller885 at aol.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html