[Elecraft] [K3] receive on ssb--DSP problem?

[Scott Monks]

Hi all;
     It has been a week or so since my question but have not had time to give an update.
    First, I received several good suggestions (Wayne/N6KR suggested that check the settings for the filters, and Brian/K3KO mentioned that it might be a squelch problem), unfortunately nothing helped, and in searching each parameter I found even more rare behaviors!  My last resort was to load up a previous saved configuration (also suggested by Olaf/LA3RK).  I loaded my last config file--and everything worked great!  I only had to return the Dual Passband setting and the CW pitch to where I had them and I was content!  

    I live in a not-so-good location for ham radio (mountains on all sides!), but even with time off to help around the house to get things ready for the holidays I still had time to make 112 contacts during the 10m contest to get Hidalgo at least activated!

    Thanks for all of the advice.  It is good to belong to a group to which you can turn to the members for help, especially here where there are so few clubs!  When Santa delivers my KAT500 I am sure I will have othere questions--hi, hi!

73, good DX, and great holidays!
Scott  XE1/AA0AA; AA0AA