[Elecraft] TX DLY with CW VOX....

[Don Wilhelm]

Mirko,

The delay of RF should be the same whether using PTT or VOX.
In most cases, when using PTT, there is a human 'injected' delay because 
one would operate the PTT before beginning to send CW (or speak into the 
mic) - that delay is not present when using VOX, but the delay set into 
the menu will still be effective.

73,,
Don W3FPR

On 12/15/2013 8:45 AM, DL6ET wrote:
> I'm running the K3 in CW using VOX to key the rig (triggered by my RUMlog
> Logging Software).  I'm concerned that RF out when using VOX may not be
> delayed by TX DLY as it is when using PTT control. Can someone state as a
> fact certain that the delay is there when using VOX?
>
> vy 73
> Mirko DL6ET
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/TX-DLY-with-CW-VOX-tp7581725.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>