[Elecraft] K2 / KPA ALC problem. Ancient manual, recent suggests bypass C.

[Don Wilhelm]

Chris,

There is no harm in that at all.
If you have a very long cable between your EC2 enclosure and the K2, you 
may try shortening it.

I suggest you check the actual power output vs. the requested power 
setting before attempting anything else.

73,
Don W3FPR

On 12/13/2013 2:52 PM, Chris Kimball wrote:
> The manual I was looking at was KAT100 Revision A, Nov 5, 2002. (A vintage
> manual!)
>
> The current manual at the Elecraft site is KAT100 is Revision C, March 12,
> 2003, which on page 34 suggests putting "a 0.01 uF capacitor from pin 7 to
> ground (inside the backshell)."  for "Erratic power control with K2/100".
>
> Should I try this?
>
> Thanks,
>
> Chris
> NQ8Z
>