[Elecraft] HDSDR Mirrored spectrum

[Chris Johnson]

That was it.  The iMic had a loose connection on the R channel in the mic/line switch.   After playing with the cables, it started working properly.  

On Dec 8, 2013, at 5:14 PM, Mike WA8BXN <hubby2k at hotmail.com> wrote:

> Mirror images generally mean you are not getting both I and Q audio into the
> program. Most common cause is not having stereo input on sound card on
> computer but iMic is stereo. I would check cable. 
> 
> 73 - Mike WA8BXN 
> 
> 
> 
> 
> -------Original Message------- 
> 
> From: Chris Johnson 
> Date: 12/8/2013 7:01:29 PM 
> To: Elecraft Reflector 
> Subject: [Elecraft] HDSDR Mirrored spectrum 
> 
> I followed the guide on HDSDR's website for the KX3 and it IS working, but
> it is odd vs all my other SDR radios. The RF seems mirrored on both sides of
> the center DC spike. Is this normal? 
> 
> I'm using an iMic with the RXIQ setup using the HDSDR KX3 guide exactly.
> Tuning works great. Input sampling rate of 48K. 
> 
> https://www.dropbox.com/s/jx6tpp29olg2tci/Screenshot%202013-12-08%2016.52.45
> png 
> ______________________________________________________________