[Elecraft] Yamaha CM500
Chester Alderman
aldermant at windstream.net
Wed Dec 4 16:29:53 EST 2013
The below is confusing information! The CM500 mike and headphone plugs as
they are, will fit into the back of the K3. If you want to use the K3's
front connectors, you need to cut wires and do some soldering to use the
front panel MIC connector and the front panel PHONES connector. My guess
would be that everybody just plugs into the K3's rear connectors, thus
eliminating the bias battery box. Check your manual to find out how to apply
bias via the K3. A good amount of common sense would be helpful here!!!
73,
Tom - W4BQF
Subject: Re: [Elecraft] Yamaha CM500
No adapter is required - plugs fit as they are! :-)
On Wednesday, Dec 4, 2013, at Wednesday, 1:10 PM, Lee Buller wrote:
>
>
> Does anyone sell a cable or have the information for connecting a CM500
to a K3? I think an adapter of some sort is in order here. I was thinking
using a adapter to 1/4 inch for the headphone part....but I need to make a
pig tail for the mike.
>
>
> Lee - K0WA
>
>
> In our day and age it seems that Common Sense is in short supply. If you
don't have any Common Sense - get some Common Sense and use it. If you
can't find any Common Sense, ask for help from somebody who has some Common
Sense. Is Common Sense divine?
>
> Common Sense is the image of the Creator expressing revealed truth in
> my mind. - John W. (Kansas)
>
> Never interfere with anything that isn't bothering you.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list