[Elecraft] freq counter probe ?

[Don Wilhelm]

Bryan,

Yes, the manual says to put the probe into the TP2 test point and 
'store' it there so you can align the filters without removing the top 
cover.  However, if the filters are properly aligned, you do not want to 
inadvertently change them (or let some other op play with them at Field 
Day), so I recommend that the probe be removed.
With the KPA100 installed, it is mandatory that the probe be removed, 
but this is not pointed out in either the K2 nor the KPA100 manual.

73,
Don W3FPR

On 12/1/2013 5:08 PM, Bryan wrote:
> So, apparantly I should remove the probe from my K2/10 for normal 
> operation ???
> The manual is clear that it should be replaced after installing the KSB2.
> What's the recommendation here?
>
> 73, Bryan VE6HBS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>