[Elecraft] Made a DB15 cable to connect K3 + KAT500, but now Amp is disabled

[zl2ke]

There seems to be two possible solutions for my amp-disabled problem:

1.  Remove the wire to pin #10 from my homebrew cable, and still use the 
     RCA cable from the KAT500 to the SB220 amp.

2.  Make a new cable from the SB220 to the 15 socket on the back of 
     the KAT500 marked "AMP", using pin #10 for the centre conductor of the
     RCA cable and pin #5 to the shield/ground of the RCA cable.
     (Suggested by Dick K6KR.)

Iain, your suggestion of removing the wire to pin #10 is the easiest option
for me,
but I will wait a bit to see what others say 

73,  Steve   ZL2KE



--
View this message in context: http://elecraft.365791.n2.nabble.com/Made-a-DB15-cable-to-connect-K3-KAT500-but-now-Amp-is-disabled-tp7578367p7578393.html
Sent from the Elecraft mailing list archive at Nabble.com.