[Elecraft] RF gain per band

[Lyle Johnson]

Hello Jean-Marc!

I think you are referring to the KX3, since the K3 uses a variable 
resistance control rather than an encoder.

The PRE setting (ON or OFF) and ATTN setting (ON or OFF) is stored by 
band.  In addition, the PRE gain can be set to 10, 20 or 30 dB, also per 
band.  This allows 40 dB of gain tailoring per band.

Perhaps using these features will help balance the gain from band to 
band in your station.

73,

Lyle KK7P

> In a future firmware update, I would like that the RF GAIN could be set
> independently on each band.