[Elecraft] Feature request - Disable Break In on K3

[Don Wilhelm]

Mike,

I think you mean Keyout rather than PTT -- PTT is an input signal to the 
K3 generated by an external device such as a footswitch..

The use of TX INH does not prevent the Keyout signal from activating - 
it should click the relays and start your sequencer.  BUT it does 
prevent RF from being transmitted which will protect your preamps and 
other things that need to be protected during the sequencer time.
A typical sequencer will complete its cycle in a few tens of 
milliseconds.  If you don't like the Keyout state changing with keying, 
use semi-break-in and set the delay to whatever time period you desire 
to keep the Keyout active between characters, words, etc. - that time 
will depend on your keying speed..

73,
Don W3FPR

On 8/27/2013 5:44 PM, AD6XY wrote:
> Hi Don,
>
> That doesn't work too well because the PTT signal still bounces up and down
> setting off all the relays. My IC735 used to have a VOX delay which you
> could set to something long to prevent that - but unless I missed a menu I
> can't seem to find where you set the CW VOX hang time.
>
> Mike
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Feature-request-Disable-Break-In-on-K3-tp7578303p7578313.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>