[Elecraft] P3 SVGA RTTY decode question

[Don Wilhelm]

Dick and Hashshi,

I would suggest removing the serial cable going to the PC as a test.  
That will assure nothing other than the K3 to P3SVGA is flowing over the 
two serial connections.

73,
Don W3FPR

On 8/27/2013 2:54 PM, Richard Fjeld wrote:
> Hisashi,
>
> Sorry about these posts getting out of order.  Something in my email 
> client changed the 'from' address and my post was rejected. Will fix 
> that.
>
> Okay, your problem is during receive.  That is different from what I 
> have been reporting, but perhaps I should look for it during receive,
> which I will.  Thank you.  For those who are wondering, the K3 display 
> decode will be different from what appears on the monitor.
>
> As for scoping the serial lines,  It would be good if you find 
> something. It seems like a sync problem.
>
> Dick, n0ce
>
> -----Original Message----- From: Hisashi T Fujinaka
> Sent: Tuesday, August 27, 2013 12:58 PM
> To: Richard Fjeld
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] P3 SVGA RTTY decode question
>
> My problem is during receive. I wonder if there's more problems on the
> serial line than I thought. When I have some time I'm going to put a
> 'scope on the serial lines to see if there's anything odd to see.
>