[Elecraft] K3/0 to K3

[Steven Bertsch]

It works!!! FANTASTIC!!! Thanks so much iain. I had to make the baud rate change to 38400. It was set to 9600.

73, Steve K6SAB


On Aug 24, 2013, at 11:00 AM, iain macdonnell - N6ML <ar at dseven.org> wrote:

> On Sat, Aug 24, 2013 at 9:58 AM, Steven Bertsch <sabertsch at gmail.com> wrote:
>> My friend uses the K3/0 to connect to my K3, and that works fine.
>> 
>> But when I use my K3, I use Ham Radio Deluxe which would normally connect to the 9 pin RS232 on the back of my K3, but since I have one of the remote boxes connected to my K3 9 pin RS232, I would use the com1 on the front of the remote box. I have Ham Radio Deluxe set for com1 but it won't connect to my K3 now.
>> 
>> Has anyone had this problem?
> 
> There's some configuration required on the RRC units to make that
> work. Specifically, you need to set "COM1 mode" (under "Serial
> Settings") to either "Mode 6" or "Mode 7" (depending on whether or not
> your friend also wants to connect rig-control software to the RRC at
> his place).
> 
> 73,
> 
>    ~iain / N6ML