[Elecraft] KX3 firmware update (12-kHz audio spur fixed, etc.)
Leroy
lmarion at mt.net
Sun Aug 18 20:31:05 EDT 2013
I have a huge improvement in the Weaver demod. I did not use it before. The
auto tune memories improvement is also a great upgrade.
Thank you Wayne and Elecraft team for continuing to make the KX3 the most
remarkable QRP radio ever.
Leroy AB7CE
-----Original Message-----
From: Wayne Burdick
Sent: Sunday, August 18, 2013 6:05 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] KX3 firmware update (12-kHz audio spur fixed, etc.)
I just confirmed that the opposite-sideband image is way down. I believe
John was hearing the effect of the notch at 1500 Hz, which is a
characteristic of Weaver demodulation. When you inject a carrier and sweep
through the SSB passband, the existence of the notch can make it appear that
you're hearing both desired and image signals -- but what you're really
hearing is just the tone at different pitches on either side of the notch.
73,
Wayne
N6KR
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Wayne Burdick
> Sent: Sunday, August 18, 2013 6:19 PM
> To: John_N1JM
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KX3 firmware update (12-kHz audio spur fixed,
> etc.)
>
> Interesting. Well, I and a number of other testers have noted better
> fidelity, and the op who had measured the in-band OSB image at 20 dB
> reported that it had dropped significantly.
>
> I've been listening to music in the AM broadcast band in SSB mode with FL2
> engaged, and it sounds quite clean.
>
> 73,
> Wayne
> N6KR
>
>
> On Aug 18, 2013, at 4:03 PM, John_N1JM <johnn1jm at gmail.com> wrote:
>
>> No improvement here that I can detect in the weaver demod fix.
>> 73,John N1JM
>>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list