[Elecraft] Power for P3.

[David Ferrington, M0XDF]

You could build a relay box, fed from the Aux out and feed the PR6 & the P3 from that, the power for the relay box would need to come from the same PSU that is powering the K3 or a different PSU - but turning the K3 on would power up the other units
73 de David, M0XDF
-- 
It is unwise to be too sure of one's own wisdom. It is healthy to be
reminded that the strongest might weaken and the wisest might err.
-Mohandas K. Gandhi (1869-1948)

On 17 Aug 2013, at 22:28, John wrote:

> I am using PR6 with my K3 and power for it is supplied via the RCA 12 VDC out on the back of the K3.
> Where may I supply the P3 power from the K3?  Do I need another power supply for the P3?
> Thanks 
> John.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html