[Elecraft] [PNWVHFS] Harris Channel 11 VHF TV Amplifier Modules - IMMEDIATE ATTENTION REQUIRED

Tom tomb18 at videotron.ca
Fri Aug 16 21:47:03 EDT 2013


Hmmm can't be too many scrap yards up there...
Seriously if he's going to scrap them why ask so much?

Sent from my iPhone

On 2013-08-16, at 6:07 PM, Edward R Cole <kl7uw at acsalaska.net> wrote:

> Lance,
> 
> Wow...and I cannot do it, darn!  But I have my ch.2 Platinum for 6m.  What perked my attention was the freq range of 174-230 MHz.  That ought to be perfect for 222-eme!
> 
> I sure hope someone can step forward to accept a few (or all) of these.
> 
> Meanwhile I am working on my next two eme bands: 1296 and 50 MHz.
> 
> 73, Ed - KL7UW
> 
> At 01:25 PM 8/16/2013, Lance Collister, W7GJ wrote:
>> Hello!
>> 
>> I just received a telephone call from Thomas Bohnet in Fairbanks, AK.  He is the chief engineer for a broadcasting company up there, and is about to send 18 of these Harris amplifier modules to the dump for scrap.   They are part number 992-8969-011, and are supposedly built to operate between 174-230 MHz without any modifications.  I don't know what the output would be at 2m with the units as-is, or what it might take to tweak them to 2m.  He told me he thought each unit was tuned to put out around 500w, which seems consistent with the Channel 2/6m Harris Platinum I amps with which I have dealt.  With the Channel 2 units, 10w drive typically resulted in close to 1 kw output.
>> 
>> Thomas said he would prefer if someone would purchase all 18 units from him, but he would consider selling fewer units in the interest of trying to prevent these valuable pieces from going to the dump.   If you agree to take all 18, the cost would be closer to $100 each (plus bulk pallet shipping).   If you only wanted a one or two, the cost would be closer to $200 each plus UPS boxing and shipping (which I generally found to be around $100 here). I am sure you could run a pair of these in parallel (as I described on my web page for the Channel 2 units), if you wanted to make sure they would handle the legal limit, and 50 VDC power supplies are very readily available:
>> 
>> http://www.bigskyspaces.com/w7gj/HarrisAmps.htm
>> 
>> I have no involvement in this, and cannot provide any further information.  I am simply trying to help Thomas save these amps from the dump. If you have an interest in a solid state .5 to 1 kw amp, please contact Thomas directly ASAP at telephone number 907 322-1985.  He advised me that they will be disposed of for scrap in the next couple of days if no hams step forward to put them to use.
>> 
>> GL and VY 73, Lance
>> 
>> --
>> Lance Collister, W7GJ
>> (ex WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, E51SIX, 3D2LR, 5W0GJ, E6M, TX5K)
>> P.O. Box 73
>> Frenchtown, MT   59834-0073
>> USA
>> TEL: (406) 626-5728
>> QTH: DN27ub
>> URL: http://www.bigskyspaces.com/w7gj
>> Windows Messenger: W7GJ at hotmail.com
>> Skype: lanceW7GJ
>> 2m DXCC #11/6m DXCC #815
>> 
>> Interested in 6m EME?  Ask me about subscribing to the Magic Band EME
>> email group, or just fill in the request box at the bottom of my web
>> page (above)!
>> 
>> --
>> ~The Voice of the Pacific NorthWest VHF Society~
>> You received this message because you are subscribed to the Google Groups "PNWVHFS" group.
>> To post to this group, send email to PNWVHFS at googlegroups.com
>> To unsubscribe from this group, send email to PNWVHFS-unsubscribe at googlegroups.com
>> For more options, visit this group at http://groups.google.com/group/PNWVHFS
>> --- You received this message because you are subscribed to the Google Groups "PNWVHFS" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to pnwvhfs+unsubscribe at googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
> 
> 73, Ed - KL7UW
> http://www.kl7uw.com
> dubususa at gmail.com
> "Kits made by KL7UW" 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


More information about the Elecraft mailing list