[Elecraft] Hearing aids and K3

[Joe Subich, W4TV]

That may work for a single receiver K3 ... now how to deal with the
KRX3?

73,

    ... Joe, W4TV


On 8/8/2013 8:48 PM, Jim Brown wrote:
> Here's a simple product that can be used to couple a typical headphone
> output to a hearing aid that has a T-coil. The plug is almost certainly
> a 2-circuit (Tip-Sleeve) plug, so you would need to change it to a
> 3-circuit (Tip-Ring-Sleeve) to use it with a K3.
>
> 73, Jim K9YC
>
> http://www.comtek.com/ntc102.html
>
> When I was designing systems, I told my clients to buy a few of these.
> Comtek is a fine US company based near Salt Like City. I've known them
> and used their products for nearly 30 years.
>
> 73, Jim K9YC
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>