[Elecraft] KXPA100 AMP and KXAT100 ATU pics and info

[Bob Nielsen]

OHR and Morse Express are the same company (Milestone Technologies).

Bob, N7XY

On Apr 25, 2013, at 9:44 PM, Walter Underwood <wunder at wunderwood.org> wrote:

> Oak Hills Research sells a similar BNC bulkhead connector that fits in a UHF hole.
> 
> http://www.ohr.com/parts.htm
> 
> BNC can handle roughly the same power as UHF. The max voltage on an Amphenol UHF connector is 600V. The max for BNC is 500V. A Type N connector can handle 1500V, so you can see how poor the UHF is for its size.
> 
> wunder
> K6WRU
> 
> On Apr 25, 2013, at 8:39 PM, Rick Dettinger wrote:
> 
>> Morse Express sells SO-239 to BNC Conversion Kits.  They are just metal plates the same size as the SO-239 jacks.  They have the same 4 holes and are punched for an included BNC panel jack.
>> I have used them to convert my non Elecraft QRP kits and OHR watt meter.  But, I had thought that BNC was only for QRP power levels.  Elecraft uses SO-239 for their 100 watt kits that I have bought.
>> 
>> 73,
>> Rick Dettinger  K7MW
>> 
>> On Apr 25, 2013, at 8:09 PM, Ron D'Eau Claire wrote:
>> 
>>> They are my favorite for anything under 1000 watts on HF too. Of course
>>> there are screw-on adapters for the SO-239 "UHF" connectors. 
>>> 
>>> 73 Ron AC7AC
>>> 
>> 
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html